Welcome! Studiofathom.com, GPIprototype.com and Midwestcomposite.com are now FathomMFG.com Learn more

Change is Additive 3D Printing 52716

Change Is Additive—Week of 5/27/16

CHANGE IS ADDITIVE—A 3D Printing News Series by Fathom

3D Printing Stem Cells, On-Body 3D Printing, 3D Printed High-Temperature Mini Furnace, 3D Printed Motorcycle Frame, First 3D Printed Office Buildings Join Dubai Skyline, Documenting History with 3D Scanning and Printing.

With so many weekly developments in a fast-changing industry like additive manufacturing, the headlines can really stack up. To cut through the clutter of 3D printing news, check out these staff picks of the week. What do you think is the most impactful development?

Exoskin—On-Body 3D Printing

Autodesk Research and Carnegie Mellon University have created ExoSkin, a hybrid fabrication system for designing and 3D printing directly on the body, which utilizes a custom built fabrication machine designed specifically for on-body printing. The Tactum System is also capable of recognizing what the research team calls “loose input” and can transform it into precise geometries / / Read More / / Watch Full Video

3D Printed Electric Motorcycle from APWorks

A leading aerospace manufacturer has created 3D printed electric motorbike which weighs in at about 77 lbs and is about 30% lighter than competitors in the market. The Light Rider is capable of going from 0 to 60 miles per hour in seconds / / Read More / / Watch Full Video

university-of-maryland-researchers-develop-micron-scale-graphene-based-3D-printed-furance-940.jpg

Researchers Create High Temperature-Resistant Heating Element Through 3D Printing

A research team at University of Maryland is attempting to create a high-heat resistant heating element formed by a 3D printer. According to a project source, when electrical current is applied to this heater, it can generate high temperatures (~3,000 K) with exceptionally fast rate (in less than 100 millisecond, an estimated heating rate ~20,000 K/s) and superior stability (>2,000 cycles, with continuous high temperature lasting for more than a day without noticeable decay) / / Read More // Watch Full Video

stemcells_edit_940.jpg

High-Speed 3D Stem Cell Printing

Nano Dimension, an Israeli company known for its 3D printed circuit board technology, has successfully lab-tested a 3D bioprinter for stem cells, a large step towards being able to print large tissues and organs. Nano Dimension conducted a first trial with Israeli biotech firm Accellta Ltd, showing that the adapted printer could make large volumes of high resolution cells quickly / / Read More

Dubai-Building_crop_940.jpg

Dubai Inaugurates First 3D Printed Office Building, Constructed in 17 Days

Dubai is the center of the United Arab Emirates larger 3D printing strategy, an initiative which focuses on three main sectors: construction, medical products and consumer products. The new office building, including all interior furniture, detailing and structural components, was fabricated using a 3D printer measuring 20 feet high, 120 feet long and 40 feet wide // Read More

Shipwreck_crop_940.jpg

3D Scanning and 3D Printing Extend Life of Historic Places

The combination of 3D scanning and 3D printing have enabled archaeologists to restore vital parts of the worlds fragile history. By integrating this technology into the field of archaeology, researchers have been able to recreate monuments and historic locations, including Syria’s Temple of Bel, which was recently destroyed by the terrorist group ISIS. Oakland-based nonprofit group CyArk is dedicated to documenting the worlds treasures and making them available to all // Read More // CyArk Website

3Dp_bioprintedplacenta_hypertension_preeclampsia_crop_940.jpg

3D Bioprinted Placenta Model May Lead to Treatment for Leading Cause of Maternal Death

Preeclampsia is the leading cause of death from pregnancy, occurring in about 5% of pregnancies worldwide. A team of researchers assembled at the University of Maryland created a 3D bioprinted placenta model and successfully used it to develop new life-saving treatments for preeclampsia // Read More

download_subhead_940x115
Top

Architectural Wonders, Landmarks and Monuments

In our download section this week, were featuring a list of 3D printable landmarks and monuments. Pictured above is a section of a 77 inch, fully 3D printed model of the Seattle Space Needle, a recent project from Fathom. Take a look at other monuments available for download! / / Learn More // Space Needle Project

What is Fathom working on in the day-to-day? Our team works on a lot of highly confidential product development projects, but follow us on our social media pages to see some of the projects that are open to everyone!

Facebook // Twitter // LinkedIn // Instagram // YouTube

To start a conversation about a project or discuss a quote, check out our product and  service quoting page.

Imagery and News Sources: 3Ders.org, 3Dprint.com, 3DPrintingIndustry.com, University of Maryland, Autodesk, CyArk, APWorks.  

Comprehensive Capabilities for Rapid Manufacturing

At Fathom we offer a unique advantage of speed and agility-our experts help companies go from concept to prototype to manufacturing in ways not previously possible. 

3D Printing / Additive Manufacturing
90+ Machines  
SLS / / Two-day  SLA / / Next-day 
FDM / / Next-day DMLS / / Three-day 
PolyJet / / Same-day MJF / / Two-day
Injection Molding

30 Second Quotes

Prototype Tool / / As soon as 10 days

10K Parts / / 10 days

Production Tool / / As soon as 3 weeks

CNC Machining

3 & 5 Axis Milling & Turning
(Plastics, Composites and Metals)

Tolerance Accuracy Range
from +/-0.001″ to 0.005″

Urethane Casting

Injection Molding Adjacent
without High Costs of Metal Tools

Most Commonly Used for High-Volume
Prototyping & Bridge to Production

Let’s get started.

Fathom is driven by advanced technologies and methods that enhance and accelerate today’s product development and production processes.

GET YOUR 30 SECOND QUOTE