Every Site Redraws Your Power Package. That’s the Work We Enjoy.
Bring Up Manifolds or Louver Frames and Our Engineers Pull Up a Chair
A turbine package, fuel-cell block or battery container needs dozens of frames, panels, ducts, shields and fixtures, and each site’s fuel path, permitting review and sound target can redraw them late. When a sealing surface, hole pattern or service clearance misses, it tends to show up on the commissioning pad.
Bring us the drawing that keeps changing, the part your current shop won’t quote in small lots, or a fixture nobody scoped. Our engineers will review it before we quote, suggest what would make it easier to build and get you a price you can plan around.
-
Fuel cell power modules: Frames, manifolds, thermal shields and cabinet panels around the certified stack.
-
Turbine and engine packages: Skid brackets, louver frames, duct and exhaust supports, guards and access panels.
-
Battery storage and UPS: Enclosure panels, tray brackets, insulating covers and busbar-adjacent shields.
-
Switchgear and grid-tie: Cabinet panels, terminal covers, standoffs and installation fixtures.
There’s Real Satisfaction in a Panel That Bolts Up on the First Try
Power programs usually choose between quick-turn shops that move fast but leave thin records, and production suppliers who document everything but won’t look at a short run. Most of your parts sit in the gap between those two.
Here’s what we bring instead:
-
Domestic manufacturing: Your power hardware is built across 10 U.S. locations, with revision control and lot traceability.
-
DFM, DFQ and DFE review before the quote: Engineers check fit to datum, flatness, burrs and sealing surfaces, then advise on changes.
-
30+ manufacturing technologies: CNC, sheet metal, additive, molding and photochemical machining, matched to each part family.
-
White-glove service: You’ll know who has your parts and can reach the engineer who reviewed them.
Your Data Center & Energy Infrastructure Team
Karl Satrum
Jake Delury
Bobby Youssefi
ICT & Energy Application Expertise
We have years of experience delivering high-quality parts for data center, electrical power transmission and distribution and energy storage applications.
-
Server rack and enclosure systems
-
Manifolds, port blocks and brackets for server cooling systems
-
Pump, heat exchanger and cold-plate adjacent metalwork for cooling systems
-
Power distribution, busways and intelligent PDUs
-
Power module chassis and mounts
-
Switchgear and control cabinet enclosures
-
Busbar supports and structural frames
-
BESS enclosures for energy storage
-
Inverter and PCS cabinets
Data Centers: How is Liquid Cooling Altering Cabinet Design?
AI data center builders are packing more blade servers into less space. That is pushing rack designs from air cooling to liquid cooling. Use our interactive infographic to see which mechanical components, mounting, routing, access and assembly must change and what to check before you release the enclosure design.
We’d Happily Build Everything Around the Stack
Fuel-cell deployments are moving from pilot units to repeatable onsite power blocks, and the hardware around the stack changes with each design wave. We’d be glad to make the frames, manifolds, support plates, thermal shields, cabinet panels and test fixtures.
Bridge Power Asks More of Every Bracket and Guard
Turbines and engines built for emergency standby are now running as bridge and baseload power, which changes cooling, filtration and service access. We’d welcome the skid brackets, louver frames, duct supports, guards, access panels and vibration-isolation hardware.
Fuel Pathways Change, and the Skid Has to Follow
Fuel-flexible systems are designed around today’s gas supply and tomorrow’s hydrogen, RNG or HVO plans, so the conditioning and filtration hardware keeps shifting. We’d like to build the skid frames, valve brackets, filter housings, instrumentation mounts and safety shields.
Storage Containers Are Full of Parts We’d Enjoy Making
Battery storage, UPS and microgrid systems now absorb the swings of AI training loads, which puts real demands on thermal isolation and dielectric clearance. We’d gladly make the enclosure panels, tray brackets, insulating covers, thermal barriers and busbar-adjacent shields.
Every Interconnection Plan Redraws the Cabinet Around It
Behind-the-meter generation runs through switchgear, transfer systems and grid-tie equipment, and each utility’s interconnection plan changes the layout. Your team owns the electrical design, and we’re keen to make the cabinet panels, terminal covers, standoffs, strain-relief brackets and fixtures.
Quieter Power Starts With Some Very Well-Made Brackets
Noise and emissions now come up at neighborhood meetings, so cooling, exhaust and acoustic hardware gets customized by site and often changed late. We’d jump at the duct supports, fan shrouds, louver panels, acoustic-panel brackets and heat shields.
Install Kits Deserve the Same Care as the Generator
Modular power programs assemble, test, ship and install hardware faster than any utility project, so fixtures and kits often set the pace. We’d be eager to build your assembly and test fixtures, inspection nests, carts and site install kits.
1,000+
5,000
30+
ISO 9001:2015
Fathom Edgeworks: Built to Support Data Center Power Programs
Our global sourcing solution, Fathom Edgeworks, gives data center power generation manufacturers access to an extended network of sourcing options through one accountable Fathom team.
Our domestic manufacturing capabilities are built to support onsite power programs, from prototyping through bridge production to deployment-scale volumes. That includes everything from precision thermal and structural components to rugged enclosures and cable-management hardware, all matched to the right source.
And when cost or timing matters more than staying domestic, overseas injection molding through our global partner network is available as a lower-cost option for authorized, non-sensitive repeat parts.
Use our instant quoting tool to see what Edgeworks can make for you.
What Every Data Center Power Generation Engineer, Program Manager & Procurement Manager Gets With Fathom
Hardware Around Every Power Block
Frames, enclosures, thermal, exhaust and switchgear-adjacent parts, plus fixtures and kits.
10 U.S. Locations
Domestic capacity across processes, with one team keeping your revisions straight.
DFM Before the Quote
Fit, flatness, burrs and sealing surfaces reviewed before you commit.
Built for Site-by-Site Changes
ECOs from fuel path, permitting or sound reviews become quick turns.
Prototype to Bridge to Deployment
One team carries your parts from fit-check to deployment waves.
Specialty Processes In House
Photochemical machining, precision turning, urethane casting and finishing alongside CNC and sheet metal.
Which Part of Your Power Package Keeps Getting Redrawn?
Let’s start a short technical conversation about the hardware around your next power block, whether it’s still a fit-check or already headed for a deployment wave.
Bring a print, a problem or a rough idea. For example:
- A fuel-cell cabinet panel or manifold that keeps changing as the design moves toward repeatable power blocks.
- Duct, louver or acoustic hardware that needs to change after a permitting review or neighborhood meeting.
- Assembly fixtures, test rigs and inspection nests your production line was never scoped to build.
- Install kits, retrofit hardware and service spares for battery, turbine or switchgear packages already headed to site.
You’ll hear back from an engineer who can tell you what’s makeable, what it will take and what to change before it becomes a first-article problem.
Request a Consultation
"*" indicates required fields